PRODUCT

产品中心

SHANGHAI YONZOE ELECTRONICS AND TECHNOLOGY CO.,LTD

Add:3rd floor,Block5.Lane 1130.Tongpu Road.Putuo District.Shanghai.

Zip code:200333

Tel:021-62582566;62582568

Fax:(+86-021)6258 2567

Email:marketing@yonzoe。com

Home > Product > MS-10 Digital Mag-Compass Sensor

MS-10 Digital Mag-Compass Sensor


  Introduction


MS-10 uses the magnetic properties of magnetic compass by magnetic sensing element pointer readings into electrical signals, output NMEA-0183 standard Heading statement ,calculated ROT and output it, making the original can only rely on the human eye to identify read magnetic compass can be connected to the radar, autopilot, repeater, AIS and any other navigation equipment which required heading information。


  Feature




   ● Angle Accuracy:1.0°

   ● Angle Resloution:0.1°

   ● Output Syntax:IEC61162, NMEA0183,$HDT,$ROT can be independently configured.

   ● Power Cost:<1W

   ● Output Data Rate:1Hz,5Hz,10Hz can be selected

   ● Configuration Input:1 port compatibility with RS422/485;Various types of configuration through  MS-10 monitor(optional) operation is completed

   ● Installation offset correctable,Range:-9.9°~+9.9°

   ● Support field calibration, an error source input every 15 °, can greatly improve the accuracy of output, simple calibration.

    Power Supply:24VDC(Voltage range:18V ~ 36V)

    Power Dissipation:<1.5W
    Temperture:Operation:-30℃~+70℃;Storage:-40℃~+85℃
    Waterproof:IP65
    Display Weight:800g
    Display Length×Weight×Height:19.5×15×7(cm)


  Downloads



NameFileDateSize
MS-10 Digital Mag-Compass SensorManual_of_MS-10_Digital_Mag-Compass_Sensor.pdf2015-05-23532k