PRODUCT

产品中心

SHANGHAI YONZOE ELECTRONICS AND TECHNOLOGY CO.,LTD

Add:3rd floor,Block5.Lane 1130.Tongpu Road.Putuo District.Shanghai.

Zip code:200333

Tel:021-62582566;62582568

Fax:(+86-021)6258 2567

Email:marketing@gruponan.com

Home > Product > MC-10 Electronic Compass

MC-10 Electronic Compass



  Introduction



MC-10 electronic compass is Induced the earth's magnetic field by magnetic sensor , calculates the azimuth angle information ,outputs the standard Heading and ROT value according to NMEA-0183 Standard 。 usually ,this divice can be connected to the radar, autopilot, repeater, AIS and any other navigation equipment needs the heading information。


  Feature



    Angle Accuracy:1.0°
    Angle Resloution:0.1°
    Input Ports:A standard RS422/485 output interface ;baud rates:4800/9600/19200/38400(configurable).
    Output format:Standard NMEA0183-HDT and NMEA0183-ROT (configurable).
    Output Data Rate:1Hz,5Hz,10Hz.
    Input Configuration :A standard RS422/485 intput interface, configured by MC-10 display.
    MC-10 monitor is optional, used to display Heading and ROT instructions, complete all the configurations of MC-10 sensors, all the operations can be complete by two keys.
    Installation offset correctable,Range:-9.9°~+9.9°
    Support field calibration, every 15 ° insert a source of error, greatly improve the output accuracy , simple calibration.
    Power Supply:24VDC(Voltage range:18V ~ 36V)
    Power Cost: 0.12W
    Temperture:Operation:-30℃~+70℃;Storage:-40℃~+85℃
    Waterproof:IP65
    Display Weight:800g
    Display(Length×Weight×Height):19.5×15×7(cm)


  Downloads



NameFileDateSize
MC-10 Electronic CompassManual_of_MC-10_Electronic_Compass.pdf2015-05-23934k